A brief About Freestanding Handrail
Handrails are most important safety instruments while you
work on height. These are the mostly important part of a building layout. When
properly maintained and installed, these increase chances to remain safe during
any construction work. Freestanding handrail provides support on staircases as well
as is used as a key safety device in the prevention of slips and
falls. The materials needed in how to install a handrail are a screwdriver, a
saw, mounting brackets, a drill, chalk or powder, and of course, a handrail.
One should also make sure that they are properly protected for the labor by
wearing safety goggles and work gloves.
When working in aerial lift or boom-type platforms,
including scissor lifts and bucket trucks, the worker must either have a hand
rail or guardrail system in place (where applicable) or be tied off.
Guardrail Systems or handrails make going up and down the stairs safer and more
comfortable. Perhaps you have observed that whenever you're ascending or
descending a new staircase, your hands most often look for something to hold on
to. And that's where a rail serves its main purpose. Many of us are aware that
a hand rail is put in place to prevent accidents. Specifically, it aims to
prevent loss of balance, to help a person regain balance in case of a slip or
fall, to help one go up a stair, to guide a person and provide stability
notably for those with visual and balance problems.
Handrails
also make a facility more accessible. A mandatory inclusion in wheelchair
access ramps, handrails help those utilizing mobility enhancement devices
safely navigate entry into facilities which are higher than street level. They
also provide important support for seniors and other people who have a
difficult time walking.
Freestanding Handrail play a pedestrian management role at large event
by channeling guests in an orderly fashion through desired entry points. Ideally,
the height of a hand rail is determined vertically starting from the stair
nosing up to the top of the rail. The height depends on the fixture's purpose.
But normally, it is installed in a position where it can be easily reached and
where the hand can grip it comfortably. Ensuring safety does not end in deciding
to install a hand rail. Choosing the shape of the fixture is also very
important. Experts suggest that a circular shape should be used because of its
ability to accommodate all hand shapes and sizes.
It is important to note that variations in building codes
may exist depending on where you live. Your municipality's property or planning
department should have staff and building inspectors available to answer any
questions related to the local building codes. It is best to check before
installation in order to avoid a costly renovation and service disruption later
on.
